PERI Show Room

RCS-P | Climbing Protection Panel

These are used for high-rise construction and for compliance with increased requirements for the safety of adjacent territory. They provide protection of the mounting level against the wind and safe access along the perimeter of the building. They are lifted with mobile hydraulic equipment and do not require a crane.[DETAILS](https://www.peri.ru/products/opalubka/rcs-system.html#q=RCS-P) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-rcs.html)

TRIO | Panel Formwork

These are used to form walls, pylons, and columns. The exemplary quality ensures durability and reliability. An optimal set of panel sizes and a universal connecting coupler ensure high productivity of work.[DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-trio.html)

BR | Platform Beam

These are used in staircase and elevator sections of buildings. They provide quick and safe access to the internal shaft formwork. A crane is used for adjustment.

TRIO MR | Panel Formwork

These are used to form walls, pylons, and columns. TRIO MR (modificate for Russia) is an evolution of the classic TRIO frame formwork, considering the needs of the Russian market. Many unique engineering solutions simplify the installation of complex areas and speed up assembly.[DETAILS](https://www.peri.ru/products/triom-mr-ramnaya-opalubka-dlya-sten-kolonn-fundamentov-liftovyh-shaht.html) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-trio-mr.html)

TRIO ST | Panel Formwork

These are used to form walls, pylons, and columns. TRIO ST (standard) sets the quality standard for the classical frame formwork for the Russian market. Individual size panels can be manufactured at the request of the customer. Structural solutions provided by the system optimize labor costs and allow obtaining a consistently high quality of the concrete surface.[DETAILS](https://www.peri.ru/products/trio-st-ramnaya-opalubka-sten-kolonn-fundamentov-shaht.html) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-trio-st.html)

SB | Brace Frame

These are used for single-sided concreting of walls and for cantilever concreting of slabs. They can be extended to the required height of up to 8.75 m. The frames are compatible with all types of wall formwork.[DETAILS](https://www.peri.ru/products/opalubka/sb-brace-frame.html#q=SB) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-cb.html)

MAXIMO | Panel Formwork

These are used to form walls and pylons. The unique anchor system with one-way access and without the use of spacer tubes speeds up the assembly and ensures the architectural quality of the concrete surface.[DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-maximo.html)

TIMRON | Opening former for windows

These are used for concreting walls with windows. The versatility and reusability of the system increases the work productivity. Compatible with all types of wall formwork.[DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-timron.html)

TIMRON | Opening former for doors

These are used for concreting walls with doorways. The versatility and reusability of the system increases the work productivity. Compatible with all types of wall formwork.[DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-timron.html)

DUO | Universal Formwork

These are used for concreting walls, pylons, columns, and slabs without a crane. The weight of the board is no more than 25 kg due to the polymer composition. It is the best solution for low-rise construction and renovations indoors. No hammer is required for assembly; therefore work can be completed with minimal noise.[DETAILS](https://www.peri.ru/products/opalubka/duo-formwork.html#q=DUO) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-duo.html)

RCS | Rail Climbing System

These are used in high-rise construction with steep walls. The platforms fix the wall formwork and ensure safe access. Built-in height/tilt adjusters and a carriage for dismantling increase the work productivity and the formwork turnover. They are lifted with mobile hydraulic equipment and do not require a crane.[DETAILS](https://www.peri.ru/products/opalubka/rcs-rail-climbing-system.html#q=RCS-C) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-rcs.html)

VARIO GT 24 | Girder Wall Formwork

These are used for vertical structures with complex geometry, high loads, or architecturally complex surface. The arrangement of elements is designed individually on a case-by-case basis. It is possible to use matrixes for architectural concrete for formlining. It is possible to design large-format panels.[DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-vario-gt-24.html)

CB | Climbing Formwork

These are used in structures with steep walls. The platforms fix the wall formwork and ensure safe access. Built-in height/tilt adjusters and a carriage for dismantling increase the work productivity and the formwork turnover. A crane is used for lifting.[DETAILS](https://www.peri.ru/products/opalubka/cb-climbing-formwork.html#q=CB) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-cb-platform.html)

ACS | Self-Climbing System

These are used in high-rise construction to form bridge pylons and walls. Compatible with frame and beam wall formwork. They are lifted using hydraulic equipment in once cycle, no crane is required. The system is designed individually, considering the specific features of the work.[DETAILS](https://www.peri.ru/products/opalubka/acs-self-climbing-system.html#q=ACS) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-acs.html)

Slab Table

These are used for slabs in buildings with an open facade and many concrete sections. Individual design of the dimensions of the tables ensures fast installation/dismantling (up to 20 square meters per 1 crane cycle). The rigid design of the tables ensures safe access along the perimeter and increases the beam/plywood turnover. The set includes a crane lifting beam and a trolley for moving around the floor.[DETAILS](https://www.peri.ru/products/opalubka/table-module-vt-slab-table.html) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-slab-tables.html)

SKYDECK | Panelised Slab Formwork

These are used for slabs with a simple structure and many concrete sections. Strong 15-kg panels increase productivity considerably compared to classical beam formwork. The use of lowering prop heads makes it possible to dismantle the panels without using the floor slab, which reduces the amount of required equipment.[DETAILS](https://www.peri.ru/products/opalubka/skydeck-slab-formwork.html) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-skydeck.html)

VARIOKIT | Engineering Construction Kit

It is a set of ledgers, telescopic spindles, and connectors for a wide range of tasks (cantilever concreting, single-sided concreting, complex geometry, etc.). It is designed individually.[DETAILS](https://www.peri.ru/products/opalubka/variokit-modulnyi-komplekt.html#q=variokit) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-variokit.html)

ST 100 | Stacking Tower

These are used for slab formwork. The size of the frame structure of the towers is 1x1 m. The kit consists of only 5 elements, which simplifies assembly and minimizes the number of errors.[DETAILS](https://www.peri.ru/products/stroitelniye-lesa/st100-stacking-tower.html#q=ST100) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-st100.html)

PD 5 | Shoring System

These are used for slab formwork. The towers have a frame structure. The bearing capacity is up to 52 kN; the assembly height is up to 10 m.[DETAILS](https://www.peri.ru/products/stroitelniye-lesa/nesushiye-lesa/pd-5-nesushiye-lesa.html#q=PD%205)

MULTIPROP | Aluminium Slab Props

These are used for slab formwork as individual racks or towers. Lightweight aluminum racks up to 6.25 m long facilitate installation. The special shape of the cross-section of the legs provides high collapse resistance. Built-in measuring scale.[DETAILS](https://www.peri.ru/products/opalubka/multiprop-aluminium-slab-props.html#q=multiprop) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-multiprop.html)

PEP Ergo | Slab Props

These are used for slab formwork as part of girder formwork. A wide range of standard sizes (from 1.5 to 5 m) and high load-bearing capacity (up to 50 kN). Built-in anti-pinch safety mechanism. Reinforced impact nut. Optional enamel or galvanized coating.[DETAILS](https://www.peri.ru/products/opalubka/pep-ergo-tubular-steel-slab-props.html#q=pep%20ergo) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-pep-ergo.html)

Plywood Formlining | The right formliner for all requirements

These are used for formlining. You can choose the best solution in terms of quality and cost thanks to a wide range of manufacturers and standard sizes of plywood. [DETAILS](https://www.peri.ru/products/opalubka/plywood-commodities.html) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-fanera.html)

Formwork Girder VT 20

These are used in many formwork systems. The girders have been produced at Noginsk-Technopark since 2015 in compliance with German quality standards.[DETAILS](https://www.peri.ru/products/opalubka/balki-dlya-opalubki/vt-20k-formwork-girder.html) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-vt20.html)

Components and accessories

A wide range of accessories for formwork and scaffolding. For more information, visit the online store: https://shop.peri.ru/ [DETAILS](https://shop.peri.ru) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-osnastka-i-servis.html)

PERI UP Easy Facade Scaffolding

The design concept of the facade scaffolding with the Easy Frame combines safety and cost-effectiveness. The scaffolding is characterised by its very low weight, thus resulting in significantly reduced assembly and dismantling times. As the guardrail for the next scaffolding level is mounted without any additional components when using the Easy Frame, the scaffolder is secured against falling on every level without requiring rope protection. The special feature: the Easy Frame rosette allows for combination with system components of the PERI UP Flex modular scaffolding. This opens up new application possibilities also for complex tasks.[DETAILS](https://lesa.peri.ru/products/konstruktsii/peri-up-easy.html)

PERI UP Flex Staircase 100 / 125 | The stairs for high load-bearing and accessibility requirements

The PERI UP Flex Staircase 100 / 125 is assembled using stringers and individual stair treads. With its 100 cm and 125 cm step widths and separate landings, the ten-legged stair tower is ideal for accommodating a large number of users. The perforated decking is extremely slip-resistant and simultaneously reduces ice formation in winter. Due to the closed design of the steps, small objects are prevented fromfalling through.[DETAILS](https://lesa.peri.ru/products/konstruktsii/lestnitsy-dostupa/peri-up-flex-100-125.html) [DOWNLOAD CATALOG](https://www.peri.ru/dam/jcr:77fa3052-63c0-43a7-bcd4-2fbc5eac1271/peri-up-%D0%BC%D0%BE%D0%B4%D1%83%D0%BB%D1%8C%D0%BD%D1%8B%D0%B5-%D0%BB%D0%B5%D1%81%D0%B0.pdf)

PERI UP Flex Stairs 75 | The lightweight stair tower for flexible access solutions

The lightweight, welded aluminium flights of stairs with 75 cm widths are easily and quickly assembled on ledgers of the PERI UP modular scaffolding system. This results in four-legged stair towers with alternating staircase units or staircase units in the same direction with heights of up to 100 m. The PERI UP Flex Stairs 75 is designed to accommodate 2 kN/m² loads and serve as access to working areas or construction sites.[DETAILS](https://lesa.peri.ru/products/konstruktsii/lestnitsy-dostupa/peri-up-flex-75.html) [DOWNLOAD CATALOG](https://www.peri.ru/dam/jcr:77fa3052-63c0-43a7-bcd4-2fbc5eac1271/peri-up-%D0%BC%D0%BE%D0%B4%D1%83%D0%BB%D1%8C%D0%BD%D1%8B%D0%B5-%D0%BB%D0%B5%D1%81%D0%B0.pdf)

PERI UP Flex Working Platform

With PERI UP Flex, safe working platforms can be realised at any height. With the continuous metric system grid and the possibility of changing the direction of the decks, the modular scaffolding can be optimally adapted to suit virtually any local conditions. With the self-securing ledger connection on the rosette and the integrated protection against lifting in the decking, PERI UP Flex can be mounted extremely quickly.[DETAILS](https://lesa.peri.ru/products/konstruktsii/lesa-dostupa/peri-upflex-modular-scaffold.html)

Suspended Scaffolding

The trolley with connected standards can be suspended on I-shaped steel profiles and carry loads up to 19.7 kN. This allows entire platforms to be moved, e.g. on the underside of oil platforms or bridges. For project-specific solutions, rentable steel components from the VARIOKIT Engineering Construction Kit or other PERI formwork systems for the supporting structure are often used.[DETAILS](https://lesa.peri.ru/products/konstruktsii/peri-upflex-suspended-scaffold.html) [DOWNLOAD CATALOG](https://www.peri.ru/dam/jcr:d219254f-345f-4d4d-bb7b-6f90fe842788/%D0%BA%D0%B0%D1%82%D0%B0%D0%BB%D0%BE%D0%B3-%D0%BB%D0%B5%D1%81%D1%82%D0%BD%D0%B8%D1%86%D1%8B-%D0%B4%D0%BE%D1%81%D1%82%D1%83%D0%BF%D0%B0.pdf)

Scaffolding for tanks

Circular scaffolding is used to ensure a proper access to the object surface. The scaffolding tube flange holes are designed so that the UH+ horizontal crossbar can be mounted at 45 deg. angle. It allows you not only to repeat the shape of the object, but also to use a three-tube scaffolding support system, thus saving material for each section.[DETAILS](https://lesa.peri.ru/products/konstruktsii/peri-up-flex-for-tanks.html)

Event Solutions

Due to the ease of assembly, reliability and safety, PERI UP Flex modular scaffolding systems are often used in the entertainment and events industry. Stands, stages, camera towers, cable bridges, TV-platforms, desk-type cabins and sports jump ramps are constructed from the elements of the system. Structural elements are also used for arranging exhibition areas.[DETAILS](https://lesa.peri.ru/otrasli-primeneniya/event.html)

Trusses and gangways

With the PERI UP Flex Lattice Beam ULS, spans up to 10 m can be bridged cost-effectively. The beam consists of 5 easy-to-handle individual components with a maximum length of 1.50 m and maximum weight of 15.4 kg. The beam length can be adjusted in 25 cm increments. PERI UP decks can be directly mounted onthe upper chords of the beam.  

PERI UP FLEX industrial Scaffolding

PERI UP Flex modular scaffolding system is a perfect solution for industrial sites. A well designed set of standard elements makes it possible to assemble even the extremely complex structures, and a built-in safety system reduces the risk of accidents.[DETAILS](https://lesa.peri.ru/lesa-peri-up-flex.html) [DOWNLOAD CATALOG](https://www.peri.ru/products/katalog-peri-up-flex.html)

Side-mounted platforms

Carpenters bracket scaffolding provides access to hard-to-reach places of span structures and is used in facade work to bypass the arched passage. They allow working at height without erecting scaffolding from the ground. When erecting, the cantilever (bracket) section can be supported at the other end by counterweight or strut off to the frame of the building. Scaffolding is built both: upwards, resting on the cantilever overhang, and downwards as a suspended access platform. The structure can use standard elements and parts of formwork systems, such as telescopic poles (tubes) and steel crossbars.[DETAILS](https://lesa.peri.ru/products/konstruktsii/peri-up-flex-consol-lesa.html)

PERI UP-2 industrial Scaffolding

Mobile platform / Scaffold towers

A versatile type of scaffolding that makes it possible to erect a working platform and provide an access to the object. By equipping the scaffold tower with wheels instead of supporting spindles, one can move the structure along a flat surface and secure it by means of a brake, which is built in the wheel. [DETAILS](https://lesa.peri.ru/products/konstruktsii/peri-upflex-shoring.html)